Green Hat Update

Our aim is to keep you updated with industry facts and the latest prosecutions.
Below is an HSE prosecution that took place on 27th August 2020.


A manufacturer has been ordered to pay £120,000 after a worker was fatally crushed in a machine designed to cut large rolls of adhesive material.

On 10 April 2018, Brett Dolby was operating the slitting machine at Scapa UK’s Dunstable factory. He was drawn into an in-running nip between a rotating roller and the adhesive material. His colleagues found him trapped in the machine, having suffered fatal crush injuries.


Health and Safety Executive (HSE) investigators revealed that Brett was required to work close to an unguarded in-running nip while the rewind slitting machine was in operation, which presented a hazard due to rotating parts.

Luton Magistrates’ Court was told the risk assessment failed to identify the in-running nips and rotating parts on the machine. Machine operators were provided with inadequate information and training relating to the risks associated with this operation and employees were placed at severe risk of injury.

The HSE and an external consultant had supplied advice relating to the guarding of machinery on-site six years previously but had failed to take action.

The incident could easily have been prevented if the company had properly assessed and applied effective control measures to minimise the risks from dangerous parts of the machinery said HSE inspector Emma Page after the hearing.

Last week, Scapa UK admitted breaching section 2(1) of the Health and Safety at Work Act. As well as the £120,000 fine, it was ordered to pay full costs of £15,192.

How can I get help or advice? If you need help or guidance in the development and implementation of a Health and Safety System please do not hesitate to give us a call on 01792 797833 or contact us via email on